Agilent Technologies 1000 Series Скачать руководство пользователя страница 123

Страница: 123 / 154

Saving, Recalling, and Printing Data

Agilent 1000B Series Oscilloscopes User’s Guide

123

To switch between files, path, and directory panes

In the Disk Mana. menu (

[Save/Recall]

Disk Mana.

), press

Explorer

switch between:

In each of these panes, the

entry knob is used to select items.

To navigate the directory hierarchy

In the directory pane (see

“To switch between files, path, and directory

panes”

on page 123):

•

Turn the

entry knob to select folders.

•

Push the

entry knob to navigate into the selected folder.

To create new folders

In the Disk Mana. menu (

[Save/Recall]

Disk Mana.

), press

New Folder

Use the folder/file naming dialog to enter the folder name. See

“To edit

folder/file names”

on page 124.

In the New Folder menu, press

Save

Files

Places the cursor in the files pane.

Path

Places the cursor in the path pane.

Directories

Places the cursor in the directories pane.

Содержание 1000 Series



























































































































































Результаты поиска

Содержание 1000 Series

Отзывы:

Agilent Technologies 1000 Series, Руководство пользователя, Страница: 123 / 154

Результаты поиска

Содержание 1000 Series

Отзывы: