30798 R1
3
3. Loosen the 3/4" nut (G) on the swivel arm (A).
4. Change the position of the wheel and re-tighten the 3/4" nut.
5. Remove the axle support and jack.
6. Repeat on other wheel.
Note
If the auger must be transported on the road for any considerable distance at speeds higher than 10
mph (16 km/h), the wheels and hub assemblies should be re-installed on the auger axle spindle.
Note
When moving the auger sideways in the swivel arc position, make certain the area is level and free of
debris. Holes and bumps may cause the auger to upset.
Figure 2.
Equipment Decals
P.O. Box 39
Rosenort, Manitoba, R0G 1W0 Canada
Website: www.aggrowth.com
Phone: (866) 467-7207 (Canada & USA) or (204) 746–2396
Email: [email protected]
Fax: (866) 768-4852
©Ag Growth International Inc. 2021, Printed in Canada
A114 SWIVEL ARC KIT –
