AGFEO TFE 2, Руководство по установке, Страница: 12 / 20

12
TFE 2, TFE 4
Telephone System Configuration
After you have connected the door phone to the telephone system you will have to read out the
system configuration. Assign in the section “Devices: Analogue / Analogue System Phones” an
extension number to which the door phone is connected. Also select the “Phone Type” to
“Door”. Please ensure that the external line seizure for the door phone will be set to “access
with 9”.
Click on the section „Devices: Doors “. On the right hand side click on the item „Door“.
Now allocate an extension
number for each bell push.
Once you have allocated all
required bell pushes, you
may now select the Call
Distribution for Day and or
Night Service by clicking on
the relevant item.
In this example we
have selected Call
Distribution (Day)
and can now select
the extensions
which should ring
when the bell push
51 is pressed.
Enter in the same section how long a door phone call should ring on the telephone extension
and for how long the connection is allowed to last for an external call until the line will be force
released. Please ensure that the timing for signalling and call duration is also set to an equal
time in the door phone.
Finally enter the DTMF digits for controlling the door phone: „#9“ to operate the door opener,
„#0“ to end the call and any digit to speak.
Now upload the program data to the telephone system.