AGFEO AS 181 plus, Руководство пользователя

Страница: 163 / 220

2 - 45
Analogue and
ISDN-Phones
Call forwarding - clear
Notes
Configuring Call forwarding from
external
Notes
h P S633 P Z P R Q Pª
Lift receiver enter the code for clear
call forwarding place the
receiver on
hook
confirm the input, wait
for the
acknowledgement tone
enter the system
or multiple
subscriber
number
Q P S63 PZ P Z P
R P Z P R Q P ª
h P Z Q Q P Z
Enter the code number
of the switching box
within 15 seconds as a
DTMF signal
Lift receiver
Ringing tone 2 to 3
rings
Enter the direct dialling
in or multiple subscriber
number of the switching
box Wait for 5 seconds
internal music on
hold
Wait for 5 seconds internal
music on hold if the code
number is correct
Confirm input Replace receiver Wait for the
acknowledgement
tone Confirm input
Diversion: Enter the system or
multiple subscriber number
Destination:Enter the
external phone number or
phonebook number
Enter the code for
permanent call
forwarding
Diversion destination:
1 = external phone number
2 = phonebook number
When call forwarding is on, you hear the special dial tone of the ISDN exchange when you
seize the outside line.
When you have configured call forwarding in the exchange, please note that up to a minute
may pass between setting up and the acknowledgement tone. Do not replace the receiver
during this time.
Call forwarding from an external location: please note that you can confirm inputs by
pressing the
r
key instead of the
R
key.
You can only program a call forwarding destination if this has not already being forwarded.
Outgoing calls are unaffected if call forwarding has been set. You will hear a special dial tone
from the telephone exchange whilst this feature is enabled.