manualshive.com logo in svg

AGFEO AC 14, Руководство пользователя

Поделиться
Скачать
AGFEO AC 14 Скачать руководство пользователя страница 38

U - 24

User Guide

Call Charges

Your telecommunications system can record the costs of calls if your network operator offers
the ISDN feature “Transfer connection costs at the end of the call” and the providers you use
also transmit these. For technical reasons the data on the telephone bill may differ from the
connection cost totals of your telecommunications system.
PIN (Personal Identity Number) – You can protect access to the charges menu by entering a
4-digit cost PIN. If you hear the busy tone when you start the cost menu, you have to enter the
cost PIN after*567. If you hear the short acknowledgement tone, no PIN is defined for the cost
menu. If you forget the cost PIN, you can change it with TK-Suite on the PC or contact your
dealer.
Before Entering the factor for a tariff unit, you should programm how many decimal places
the factor shall have. You can choose from 0 to 3 decimal places.
Factor for a tariff unit – Use the maximum 4-digit user factor (e.g. 0,06 

E

 per unit) to define

how much a tariff unit costs for every internal subscriber.With the maximum 4-digit basic
factor, set your telecommunications system to the amount (Cents per unit) which the network
operator charges for one tariff unit.
Limit / Disconnect at limit – You can define a 7-digit cost limit (Cents) for every internal
subscriber. You can also define what is to happen when the cost limit is reached. Can the
internal subscriber continue the conversation he has begun but not start a new external call
or will the connection be cut off. The subscriber can only make external calls again after
clearing his total costs. Exception: The direct phone number can also be dialled on reaching
the limit.
Transmission of charge pulses - You can choose whether charge pulses shall be transmited to
your analogue extensions or not.

As-delivered state:
- PIN no entry
- User factor (0,06 

E

)

- Basic factor (network operator) 0,06 

E

- Limit no entry
- Disconnect at limit off
- Cost log off for all subscribers
You cannot telephone as long as the charges menu is started. You hear the special dialling
tone when you Lift handset. You cannot telephone again until the cost menu has been exited.

Содержание AC 14





















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды