AGFEO AC 14 USB Скачать руководство пользователя страница 62 | Manualshive

Страница: 62 / 76

AGFEO AC 14 USB Скачать руководство пользователя страница 62

C - 4

Communication through PC

Install driver software

Important !

If you have already installed an ISDN

card from a different manufacturer in your
computer you must first remove this. Follow the
instructions in the manufacturer’s handbook.

During the software installation, you are possibly
requested to insert the operating system CD. Get
your operating system CD.

Before you install the driver software the TK
system must be connected to the PC via the USB
interface.

1. When the PC has recognised the TK system

connected to it the „Hardware Assistant“
appears. The Hardware Assistant installs the
software for a new hardware component
(AGFEO AC 14 USB).
Click on „continue“.

2. In the next dialog window select „Look for the

best driver for the equipment (recommended)“
and click on „continue“.

3. Activate the option „CD-ROM“ in the next dialog

window and de-activate all other boxes. Place
the CD in the CD-ROM slot and click on
„continue“.

4. Once the drivers have been found, click on

„continue“ to start installation.

5. The drivers will be installed.

6. Under "ISDN configuration" you read the note

text and click on "continue".

7. Select the D-channel-protocol: "DSS!: Euro-

ISDN" and click on "continue".

8. Now you are requested to input the telephone

number(s). Enter the internal telephone
number(s) for the PC at the USB link. The
internal call numbers 20 to 29 are available
(see system programming under port
allocation). Click on "continue".

9. The ISDN configuration is finished. Click on

"finish".

10. On request, insert the operating system CD, in

order to load the USB support. After the
software for the new device was installed, click
on "finished".

11.Once installation is completed, start your PC

up again.

Set up USB connection

You can connect the TK system to a desktop PC
or notebook via the USB interfaces.

1. Take the USB cable supplied (identified by the

USB symbol on its plugs)

2. Plug the square plug (B-plug) for the USB

cable into the USB socket on the TK system

3. Plug the flat plug (A-plug) on the USB cable into

one of the USB connections on your computer

4. Switch your computer on.

When you first start up Windows with the TK
system you will be asked to specify the position of
the driver. For further details see section „Install
driver software“.

System requirements

The following are system requirements for
installation of the software packages:

Desktop-PC or Notebook with hard disk and CD
ROM
. Pentium II or higher

. RAM minimum 32 MB (more working memory

improves performance)

. 1 free USB interface

- Microsoft Windows 98/2000, ME,NT 4.0

. Full-duplex soundcard, microphone and

loudspeaker (optional) for TK-Voice (answering
machine)

«
...
60
61
62
63
64
...
»

Содержание AC 14 USB













































































Отзывы:

Нет отзывов