Troubleshooting
Symptom
Cause / Solution
Paper Jam
Power off and Power On again. Paper will
be automatically ejected. If not, please
contact customer service.
Image quality is not good.
Print quality could be less if your photo
source has low resolution.
Over 1280 x 2448 pixel is recommended for
best image quality.
Printer is not responding.
Press Reset button with sharp tool like pin.
Power and Active Status
Power ON: White / Power OFF (2 Sec): Off / Printing: White Flickering
F.W Upgrade: Pink Flickering / No Cartrige, Error: Red Flickering
Waiting, Cooling: White
Charging: Red / Charging Complete: Green
Connecting: Green Blink / Bluetooth Complete: Green
FCC (Federal Communications Commission) // CE
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept interference received, including interference that may cause
undesired operation.
Notice of compilance for the European Union
Products bearing the CE mark comply with the applicable European directives and
associated harmonised European standards.
Caution: Any changes or modifications to the equipment not expressly approved by the
party responsible for compliance could void user's authority to operate the equipment.
This appliance and its antenna must not be co-located or operation in conjunction with any other antenna or
transmitter.
A minimum separation distance of 20 cm must be maintainted between the antenna and the person for this
appliance to satisfy the RF exposure requirements
.
WARRANTY - 1 year limited warranty
Compatible cartridge
AGFAPHOTO
After sales service
Email:
Phone: 0033 1 85 49 10 26
Made in Korea
@ Prinics Co., LTD.
