EN
EN
2
3
SAFETY PRECAUTIONS
Important: Do not expose this product to rain or moisture to prevent
any liquid damage.
Caution: Do not disassemble this unit. To prevent any risk of electric
shock, do not remove the cover.
Ventilation: The device should be situated so that its location or
position does not interfere with its proper ventilation. For example,
the unit should not be situated on a bed, sofa, rug or similar surface
that may block the ventilation openings.
Heat: The device should be kept away from sources of high heat
such as radiators or stoves.
Cleaning: We strongly suggest using a clean, dry, non-alcohol cotton
swab to clean the glass surface periodically to maintain a clear image.
Inactivity period: The USB cord of the device should be unplugged
from the computer or the power adapter when the unit is left unused
for a long period of time.
USB overloading: Try not to overload the USB ports of your
computer. If you have too many USB powered devices connected to
your computer, there may not be enough power for the film scanner
to operate properly.
Servicing: The user should not attempt to service the device beyond
the means described in the operating instructions. All other servicing
should be referred to a qualified person.
Film Holder: The design of the film holder follows ISO standard.
In some cases, the holes on the film will not match exactly to
alignment of the holder. This is caused by non-standard cameras.
In this case, there will be a small black line on the edge of the frame
that can easily be cropped out using photo editing software.
ISO - international Organization for Standardization
PACKAGE CONTENTS
• Film scanner
• USB cable
• AV cable
• Negative film holder
• Positive slide holder
• DC5V adapter
• User’s Manual
• Brush
NOTE: You can use the provided brush to clean the backlight panel
• To do so, place the film scanner on the side and insert the end of
the brush into the door on the right side
DESCRIPTION OF PARTS
Negative film Holder
Positive slide Holder
Brush
