AGFA StudioStar Скачать руководство пользователя страница 33 | Manualshive

Страница: 33 / 54

AGFA StudioStar Скачать руководство пользователя страница 33

Appendix A — Using the transparency option

33

Appendix A — Using the transparency option

The transparency option is an optional item that allows you to scan transparencies. This appendix
describes the procedure for installing the transparency option if you have bought one for your
StudioStar.

Unpacking the transparency option

Unlocking the transparency option

Connecting the transparency option

Unpacking the transparency option

The first thing to do is to make sure you have everything you are supposed to.

1.

Open the packing box and take out all the items.

2.

Check each item to make sure that you have everything and that there is no visual defect.

If something is missing, contact your dealer.

3.

Remove the plastic wrapping and the packing materials from the transparency option.

4.

Fill out the Warranty and Registration card. You will find the product serial number on the
identity label on the rear of your transparency option.

❖

Note: Save the packing materials so that you can repack the transparency option to protect it if

you have to move it over long distances.

«
...
31
32
33
34
35
...
»

Содержание StudioStar























































Отзывы:

Нет отзывов