AGFA SR 24 iT Скачать руководство пользователя страница 29

Страница: 29 / 91

2-4

ann

apte

r 2

2. Parts of the

SR24iT

Scanner

/Printer

Screen:

The image taken from the film is projected here for view-
ing. The frame on the Screen marks the data reading
range.

Control Panel:

Many operations are controlled from the keys and indica-
tors provided here.

Image Rotation Knob:

Used to turn the Prism Unit built into the Scanner, turning
the image on the Screen.

Projection Lens
(Optional):

Used to change the size and adjust the focus of the image
on the Screen.

Fiche Carrier 5
(Optional):

Supports the viewing of microfiche.

Projection Lamp Unit:

Contains are Mirror and Lens which projects the film
image onto the Screen.

Connectors:

Provides connection points for the various options (Roll
Film Carrier and Controller).

Power Cord Socket:

Plug the power cord furnished with the Scanner into this
socket.

Power Switch:

Used to turn power to the unit ON and OFF.

Printer Connector:

Connects the scanner to the printer through an interface
cable.

SCSI Connector

Connects the scanner to the Personal Computer through a
SCSI cable. The PC Interface

Cable

Kit is required.

0820771003.book Page 4 Monday, March 19, 2001 2:49 PM

Содержание SR 24 iT




























































































Результаты поиска

Содержание SR 24 iT

Отзывы:

AGFA SR 24 iT, Руководство оператора, Страница: 29 / 91

Результаты поиска

Содержание SR 24 iT

Отзывы: