AGFA Drystar 4500 Plug & Play, Руководство по установке

Страница: 11 / 18

11/18
2805F EN 20050128 2805F EN 20050128
9
Install blocking plate and belt
1
Take 7 mm hex key.
3
On the left, pull the belt [1] over the
pulley [2].
4
Slowly turn the pulley by hand to assist
the belt.
1
2
2
On the right, loosen and refasten the
red blocking plate.
Turn the pulley only slowly to assist the
mounting of the belt.
If the printer will not be used for a
prolonged time (at least four weeks), it is
recommended to remove the belt during this
period.
B
In
st
allat
ion