AGFA DR 10s Скачать руководство пользователя

Страница: 112 / 112

For U.S.A.

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:

• This device may not cause harmful interference.
• This device must accept any interference received, including interference

that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference when

the equipment is operated in a residential environment.
This equipment generates, uses, and can radiate radio frequency energy and,

if not installed and used in accordance with the instruction manual, may

cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or

more of the following measure.

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from where the

receiver is connected.

• Consult the distributor or an experienced radio/TV technician for help.

FCC WARNING:

Changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

112

| DR 10s | Remarks for HF-emission and immunity

0351A EN 20190319 1349 *

Содержание DR 10s

















































































































Результаты поиска

Содержание DR 10s

Отзывы:

Похожие инструкции для DR 10s

Бренды по названию

Популярные бренды

AGFA DR 10s, Руководство пользователя

Результаты поиска

Содержание DR 10s

Отзывы:

Похожие инструкции для DR 10s

Бренды по названию

Популярные бренды