AGFA Anapurna H3200i LED, Руководство для продвинутых операторов

Страница: 22 / 50

www.agfagraphics.com
22
3.1.1 Shuttle
The shuttle is used for printing on the media. The shuttle consists of:
No. Shuttle part Refer to
1 Manual height adjustment (only in power off mode).
2 Vacuum control.
The vacuum system allows for a very precise control of the ink flow during print-
ing and prevents the ink nozzles from dripping in home position. 4.3
3 2 white circuits / print heads.
4 6 color circuits / print heads.
The print area of the print heads is shown by two white arrows on cover [10] of
the shuttle.
5 UV LED units for curing the ink.
6 Ink flow valves.
7 Sub air tanks (at back of shuttle).
If the vacuum system has sucked the ink too far, it will be collected in two
tanks (1 color/1 white) with level control.
8 Drain valves. Each color ink circuit has a drain valve to remove air from the cir-
cuit or to inject storage flush to clear a blocked print head.
9 Ink drip tray.
10 Cover ionization bar / wing sensors.
Side View (A)