AGFA ADC Solo, Руководство пользователя

Страница: 25 / 70

25
2301D EN 20040224
Reading an image plate
The main function of the ADC Solo is digitizing image plates and transmitting the
digital image data to the preview station and the image processing station. The
actual workflow depends on the configuration of your system.
Reading an image plate in the interchangeable configuration
In the interchangeable configuration, you must first identify the cassette via an
ID Station with ID Tablet before you can digitize the image plate.
To read an image plate:
1 Make sure the cassette has been identified properly via the ID Station.
2 Check that the ADC Solo is ready for operation:
• the ADC Solo must display the operator main screen with ‘Ready’ status, e.g.:
• the status indicator at the top of the ADC Solo must be green and be lit constantly.
❖
The ADC Solo is operational if the status field equals ‘READY’, even if status
messages of the destination are shown (e.g. ‘VIPS not ready’).
VIPS not ready READY
ADC SOLO
Status field