AGFA ADC Solo, Руководство пользователя

Страница: 42 / 70

42
2301D EN 20040224
Reading the identification data of a cassette
(Dedicated configuration only)
In the dedicated configuration, the identification data stored in the memory chip
of the cassette can be read via the ADC Solo.
To read the identification data of a cassette:
1 Check that the ADC Solo is ready for operation:
• the ADC Solo must display the operator main screen with ‘Ready’ status, e.g.:
• the status indicator at the top of the ADC Solo must be green and be lit constantly.
❖
The ADC Solo is operational if the status field equals ‘READY’, even if status
messages of the destination are shown (e.g. ‘VIPS not ready’).
2 In the ID Software on the ID Station, select the mode for reading cassettes.
Refer to the User manual of the ID Software.
The display of the ADC Solo will read:
VIPS not ready READY
ADC SOLO
Status field
BUSY
DIRECT ID
READ CASSETTE MODE
Enter cassette or press to cancel
ADC SOLO