AGFA 6007/100 Скачать руководство пользователя

Страница: 66 / 117

DR Detector Battery

Safety Directions

WARNING:
Do not use any charger other than that specifically provided

for use with the equipment.

The battery is used with the DR Detector. Do not use them in

other combinations.
Use only a power adapter complying with IEC 60601-1 or IEC

60950-1.
Make sure to turn off the detector before detaching a battery

pack.
When the detector is not to be used for some time, remove the

battery pack. Otherwise, over discharge may occur resulting in

the shortened battery life.
Securely plug the power cord of the charger into the AC outlet. If

contact failure occurs, or if dust/metal objects come into contact

with the exposed metal prongs of the plug, fire or electric shock

may result.
Stop charging the battery when the battery charger indicator

lights keep indicating that the battery is charging, beyond the

specified charging time. Not doing so may result in the battery

overheating or smoking or in an explosion or fire.
Always check the remaining amount of the battery pack during

use of the detector. If performance of the battery pack has some

problems, consult your local Agfa representative.
The battery charger is designed for the dedicated battery pack.

Do not use the battery charger other than the dedicated one.

Otherwise, a battery explosion or a battery leak may occur,

resulting in fire or electrical shock.
Do not operate the battery charger using any type of power

supply other than the one indicated on the rating label.
Do not handle the product with wet hands.
Do not attempt to disassemble, alter, or apply heat to the

product.
Avoid dropping or subjecting the product to severe impacts. To

avoid the risk of injury, do not touch the internal parts of the

battery if it has been cracked or otherwise damaged.
Stop using the battery pack immediately if it emits smoke, a

strange smell, or otherwise behaves abnormally.

| DX-D 40C, DX-D 40G | Introduction to the DR Detector

0290B EN 20190401 1627

Содержание 6007/100






















































































































Результаты поиска

Содержание 6007/100

Отзывы:

Похожие инструкции для 6007/100

Бренды по названию

Популярные бренды

AGFA 6007/100, Руководство пользователя

Результаты поиска

Содержание 6007/100

Отзывы:

Похожие инструкции для 6007/100

Бренды по названию

Популярные бренды