manualshive.com logo in svg

AGCO Valtra Smart farming, Руководство оператора

Поделиться
Скачать
AGCO Valtra Smart farming Скачать руководство пользователя страница 15

Different regional regulations can have an effect on how the battery is discarded or recycled. Inquire with

local environmental or recycling center on the proper way to recycle or dispose waste.

2.1.9  How to disengage the automatic steering

If the angle between the driving line of the tractor and the wayline is more than 75°, Valtra Guide

disengages. If the distance to the wayline is too much, Valtra Guide disengages. With the decimeter

precision, the maximum distance is 1.2 meters. With the centimeter precision, the maximum distance is

0.6 meters.
It is necessary to disengage the automatic steering and control the tractor manually in these conditions.
• The line of travel is blocked.
• The tractor does not stay on course.
Valtra Guide disengages also when you get up from the operator's seat. However, we do not recommend

that you disengage Valtra Guide with this procedure when the tractor moves.

Procedure

1.

These manual procedures disengage the automatic steering:
a) Turn the steering wheel clockwise or counterclockwise for some degrees.

If the TwinTrac reverse drive system is not used, the steering wheel for TwinTrac does not

disengage the automatic steering. If the TwinTrac reverse drive system is used, the front steering

wheel does not disengage the automatic steering. But the front steering wheel does have an

effect on the steering.

b) Drive less than 0.1 km/h for at least 10 seconds.
c) Deactivate Valtra Guide from the master activation switch.

2.

If these procedures do not disengage the automatic steering, push the Valtra Guide engage button.

2.1.10  Radio frequency exposure requirements

To comply with the radio frequency exposure requirements, maintain at least 25 cm (10 in) between the

user and the radio modem.
Handling the cord of this product, or cords associated with accessories sold with this product, will expose

you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm.
Wash hands after handling.

2.1.11  UHF radio

A license is necessary if you use an Ultra High Frequency (UHF) radio. Fines and other penalties can be the

result if you use a UHF radio without a license. It is necessary to obey all local laws when you use a UHF

radio. Local authorities can give more information on what is necessary when you use a UHF radio.
Every country have their own individual UHF radio frequencies. Before the use of UHF radio, do a check of

the allowed frequencies from your local authorities and set the UHF radio frequency accordingly.
Because of the Real Time Kinematic (RTK) mode, UHF is the most common choice of communication

between a base station and a receiver. The quality and strength of the UHF signals have an effect on the

range for UHF communications.

1.

Local conditions, such as topography, local communications and meteorological conditions, have an

effect on the range of the system and the RTK communications. If necessary, use a scanner to find

clear channels.

2.

It is possible to increase the range of the system if you adjust the base station antenna in these

procedures:
• The radio modem of the base station must have a fully charged battery.
• Directional antennas and repeaters increase the system range. With the directional antennas, you

get the full signal power from a narrower direction and thus increase the range of the system.

GUID-735CC2A2-B31A-4884-9C8A-4B3455841B8B [V2]

GUID-F5471649-1510-49D7-BC62-EBDDE8633B83 [V3]

GUID-4A0E348D-8862-48F6-84BB-C8D98B081944 [V2]

2. Safety

20

Smart farming

39 924 21 5

Содержание Valtra Smart farming











































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды