AGCO New Leader L4258G4, Руководство по обслуживанию мастерской

Страница: 14 / 31

Electrical storage batteries give off highly
flammable hydrogen gas. Keep sparks and flames
away from the battery.
Do not lay tools or other conductive materials on a
battery.
Be careful when connecting booster cables to the
machine. Electrical component damage or battery
explosion can result if booster cables are not
installed correctly.
Sulfuric acid in battery electrolyte is poisonous.
The acid is strong enough to burn skin, eat holes in
clothing, and cause blindness if splashed into
eyes.
If acid contacts eyes, skin or clothing, flush with
water immediately. If eye contact occurs, flush
with water for 15 minutes and seek medical
attention immediately.
If swallowed, drink large quantities of water or
milk. Do not induce vomiting. Seek medical
attention immediately.
Battery posts, terminals and other battery parts
contain lead and lead compounds. Wash hands
carefully after handling a battery.
Fig. 16
Never weld on a wheel or rim that has a tire on it.
Never try to mount or remove a tire unless using
the correct equipment. A tire safety cage,
instructions, and training are necessary to do the
work safely. Failure to follow the correct
procedures when mounting a tire on a wheel or
rim can cause an explosion and serious injury.
Tire repair procedures must be done by trained
and approved personnel.
Before adding air to a tire, inspect the tire and
wheel for any signs of damage. Do not attempt to
fill if damage is noticed. Have trained and approved
personnel make repairs immediately.
See additional instruction in the tire safety section.
Fig. 17
Stay away from potentially toxic fumes and dust.
Dangerous fumes can be generated when paint is
heated by welding, soldering or using a torch.
Always work outside or in a well ventilated area.
Discard paint and solvent correctly.
Always remove paint before welding or heating.
Wear an approved respirator while sanding or
grinding paint. Avoid breathing the dust.
If using solvent or paint stripper, remove the
stripper with soap and water before welding.
Remove solvent or paint stripper containers and
other flammable material from the area. Let fumes
disperse before welding or heating.
Fig. 18
1. General
New Leader® L4258G4/L4330G4 1-11
79035617A