AGCO Massey Ferguson 9195, Руководство по обслуживанию

Страница: 12 / 41

4283440M1 01-9
Safety
Make sure all the flashers are operating prior to driving on
the road. Make sure reflectors are correctly installed, in
good condition, and wiped clean. Make sure the Slow
Moving Vehicle (SMV) emblem is clean, visible, and
correctly mounted on the rear of the machine.
Always travel with the header as low as possible. Do not
drive with header up and the lift cylinder stops in the
locked position. See Cylinder Stops in this section for
more information.
Be aware of other traffic on the road. Keep well over to
your own side of the road and pull over, whenever
possible, to let faster traffic pass.
Be aware of the overall width, length, height, and weight
of the machine. Be careful when transporting the machine
on narrow roads and across narrow bridges.
Watch for overhead wires and other obstructions. Avoid
contact with electrical power lines. Contact with electrical
power lines can cause electrical shock, resulting in very
serious injury or death.
MAINTENANCE
General Information
Before doing any unplugging, lubricating, servicing,
cleaning, or adjusting:
Park the machine on a solid level surface.
Put all controls in neutral and center and lock the steering
wheel.
Turn off the control console, if equipped.
Stop the engine and take the key with you.
Look and Listen! Make sure all moving parts have
stopped.
Put blocks in front of and behind the wheels of the
machine before working on or under the machine.
Do not pull crop or any other object from the machine
while the machine engine is running. Moving parts can
pull you in faster than you can move away.
Check all nuts and bolts periodically for tightness,
especially wheel mounting hardware.
Do not attempt to service or adjust the machine until all
moving parts have stopped.
FIG. 16
D-15022
FIG. 17
D-8518