AGCO Glencoe SF4500, Руководство оператора, Страница: 13 / 30

OPERATION
FIELD OPERATION
WARNING! NEVER ALLOW ANYONE TO RIDE
ON THIS EQUIPMENT. CLEAR THE
AREA OF BYSTANDERS BEFORE
STARTING OPERATION.
WARNING! AVOID SHARP TURNS USING
BRAKES. DRIVE SLOWLY OVER
ROUGH GROUND, SIDE HILLS AND
AROUND CURVES TO AVOID
TIPPING.
Preparation for Field Use
Move the tractor hydraulic levers which control both
the axle cylinders and the winglift cylinders rearward
as if to raise both the unit and the wings to help
make sure there is no air in the hydraulic lines.
Move the hydraulic lever forward to unfold the wings.
Make sure the wing cylinders are fully extended to
allow the wings to follow the contour of the ground.
Move the hydraulic lever that controls the axles
forward to lower the implement to the ground. At this
point, adjust the hitch turnbuckle to level the frame
so it is parallel with the ground. This will help insure
that all the shanks are cutting at the same depth.
Main frame operating depth is controlled by
simultaneously adjusting the main frame
turnbuckles. Shortening the turnbuckles will
decrease the operating depth. Lengthening the
turnbuckles will increase operating depth.
continued on next page
9