AGCO Gleaner DynaFlex 9250, Руководство по обслуживанию

Страница: 37 / 41

General Information
02-8 79034308 B Rev.
FIG. 15: Slide the collar (1) to release the yoke and then
slide the yoke from the driveline mount for storage.
Repeat the procedure for the opposite driveline on dual
knife drive.
FIG. 16: Sickle Drive Timing (Dual Knife Drive) -
The two sickles must be timed to run exactly opposite
each other before connecting the drivelines to the
countershaft of the feeder housing. Both sickles must
reach the end of the stroke at the same time.
Rotate the left and the right drivelines (indicator wheels)
so that the same letter is showing in the indicator windows
(1) on the PTO bells.
IMPORTANT: If the sickle drives are out of time,
excessive sickle drive noise and unusual header
vibration will be experienced.
To set the Sickle Drive Timing of the main drive group,
refer to the procedure found in the Adjustments section,
Sickle Timing write-up.
FIG. 17: Slide the locking ring (3) back onto the yoke (2)
at the end of the driveline (1).
FIG. 18: Install the driveline (1) onto the end of the
countershaft in the feeder house.
FIG. 15
P918640
FIG. 16
P909454
1
FIG. 17
S-1258
1
2
3
FIG. 18
1
Q218979