SECTION 00 -- GENERAL INFORMATION
7
327 258 010
-- 01 -- 2008
Engine identification
Fig. 3
The engine identification is made by the information
plate (1), on the valve cover for IVECO engines, and
the serial number plate (2) on the basement for SISU
engines.
The plate shows the following information:
-- series range;
-- type;
-- serial number;
-- the type approval number, identifying the com-
pliance with the directive on gaseous emissions.
Straw chopper identification (if fitted)
Fig. 4
The straw chopper identification plate is located on the
right side next to the rotor support.
Cutting header identification
Fig.5
The cutting header can be identified thanks to a metal
plate located on the left side of the support main beam.
3
4
5
1
2
