background image

1.1.8  General hazard information

CAUTION:
Carefully read the operator's manual
before operating the machine. See all
instructions and safety rules when
operating or doing maintenance.

GUID-FE6A41D4-536F-4C0D-BE60-FA0CCDEEB171-high.jpg [High]

Fig. 4  

Do not start the engine until the area is free of

personnel. Honk the horn two times to alert

others. This will help in avoiding personal injury

because machine movement can occur.
Know the width of the equipment to keep correct

clearance when operating the machine near

fences or near boundary obstacles.
Wear a hard hat, protective glasses, and other

protective equipment, as required.
Do not wear loose clothing or jewelry that can

catch on controls or on other parts of the machine.
Make sure that all protective guards and all covers

are attached in position on the machine.

GUID-6CB742A7-222E-47ED-9806-1887BFD0CF24-high.jpg [High]

Fig. 5  

Keep the machine free from unwanted material. Remove debris, oil, tools, and other items from the deck,

from walkways, and from steps.
Secure lunch boxes, tools, and other loose items that are not a part of the machine.
Know the appropriate work location hand signals and the personnel that are authorized to give the hand

signals. Get hand signals from one person only.
Never put maintenance fluids into glass containers. Drain all liquids into an approved container.
Discard any drained fluids and discard any filter elements according to local regulations.
Use all cleaning solutions with precaution.
Report all necessary repairs.
Do not let untrained or not approved personnel on the machine.
Do not smoke when servicing an air conditioner. Also, do not smoke if refrigerant gas can be present.

Inhaling the fumes that are released from a flame that contacts air conditioner refrigerant can cause bodily

harm or death.
Inhaling gas from air conditioner refrigerant through a lighted cigarette can cause bodily harm or death.
Unless being instructed differently, complete the maintenance under the following conditions:
• Turn the battery disconnect switch to "off" position.
• The machine is parked on level ground.
• Implements are lowered to the ground.

GUID-45723AC0-5E25-4FA2-BB74-FF22568B117F [V3]

1. General

1-6

Rubber Track Tractor

79036240F

Find manuals at https://best-manuals.com

Содержание Challenger MT845E






























































Отзывы: