AGC // Mirox MNGE
– Processing Guide – Version 1.0 - April 2019
3
1. PACKAGING
Appropriate packaging prevents the glass from damage caused by:
▪
Chemical risks:
marks on the surface caused by rain (water falling directly on the glass in the packs)
or condensation (as a result of a change in temperature);
▪
Mechanical risks:
accidents involving the surface of the glass, breakages and so forth.
Mirox MNGE mirrors are available in standard dimensions. (please contact AGC sales
representatives for more details)
A label affixed to the edge of the pack indicates the exact contents of each load.
Label
Explanation
XXXXXXXXXXXXXXX
Product Barcode
MIROX MNGE
Product Name
MX5
Product Code
72 x 48 in
Product Dimension
3 mm
Product Thickness
P-T7
Product Packing
AS
Product Inserters
100 Lembar
Product Quantity
2. STORAGE
Upon receiving your order, check the condition of each pack of glass carefully and report any
breakages, moisture, humidity or serious defects to AGC representatives.
Do not neglect to check the product upon arrival.
The product must always be:
a. unpacked as soon as possible
b. stored as follows:
•
Vertically on a soft surface, such as wooden boards with spacers;
•
In a dry, well ventilated place that is not subject to major temperature fluctuations, so as to
avoid condensations;
•
Away from sources of heat and corrosive materials or agents such as organic solvent vapours,
chemicals, acids, or fuel;
•
Never outside
Storage time depends on the aforementioned conditions.
