Note: Please take out the dust bag when used against water (Fig 9)
Remove the dust bag and clean the dust from the barrel (Fig 11)
Safety device
• When there is full of water in the barrel, the float will be rise and
the appliance would stop working. In addi�on you will hear an
abnormal sound. Cut off¬the power supply immediately. Spill out
the water from the barrel. Then restart the machine.
• If the vacuum cleaner gets overturned, the float will rise. In that case,
cut off the power supply immediately and upturn the vacuum.
• If you run the vacuum or leave it alone while the float is risen, it may
damage the motor and lead to fire.
Maintenance
Clean the dust barrel
When the suc�on pressure decreases, cut off the power supply and
empty the barrel in �me.
Refer to the following steps (Fig 10)
(1) Release the lock bu�on and li� the top cover.
(2) Before remove the dust bag, hold the center edge of the bag and
shake it around 20 �me up and down.
Fig-10
Fig-9
Dust Bag