Page
23
of
34
Boiling plate and Simmer plate:
To gain access and to remove the boiling and simmer plate, remove 4 chrome buttons and stay nuts
from the top plate of the cooker, lift top plate and prop front of top plate with hob support bars.
With the top plate propped the elements can be viewed from underneath, they are held in place by
a fixing bar, when the bar is removed the element can be lifted out from the top plate, reassemble in
reverse order.
The element can be carefully propped up against the lid, ensure the lid and top plate are protected
to prevent any damage occurring.
The element connections are of the plug in type and are located towards the rear of the cooker.
The thermocouple is attached to the element using the bracket shown, it is important when
replacing the thermocouple to locate the tip in the right position on the element
The duplex thermocouples used in the Aga eR7 are all of the same type for all cooking zones.
Содержание RANGEMASTER eR7
