AGA PRO+ APRO36DFSS, Руководство пользователя и инструкции по установке и обслуживанию

Страница: 24 / 32

20
INSTALLATION
Check the appliance is electrically safe when you have finished.
n 
WARNING
Electrical Shock Hazard
• Electrical ground is required on this appliance.
• Do not connect to the electrical supply until the
appliance is permanently grounded.
• Disconnect power to the circuit breaker or fuse box
before making the electrical connection.
• This appliance must be connected to a grounded,
metallic, permanent wiring system, or a grounding
connector should be connected to the grounding
terminal or wire lead on the appliance. Failure to do
any of the above could result in a fire, personal injury or
electrical shock.
Electrical Connection to the Range
Four Conductor Wire Connection to the Range
1.
Remove the screws that secure the rear access cover
and remove the access plate to expose the range
terminal connection block
(Fig. 7-1)
.
2. Remove the screws to loosen the cable clamp (Fig. 7-2)
and pass through the four conductor wire from the
bottom of the range.
3.
Loosen the screws on the terminal block and connect
the wire to the correct terminals
(Fig. 7-2)
. Make sure
the colors of the connection cord match the colors
of the wires already connected to the terminal block
(range side).
4.
Tighten the terminal block clamp screws to securely
clamp the terminals of the attached cord.
5.
Position the cable in the cable clamp and tighten the
screws to secure.
6. Replace the rear access cover and tighten the screws.
Cable clamp
Terminal block
Green wire Red wire
Red wire
Black wire
Black wire White wire
White wire (neutral)
To 240V receptacle
Clamp screws (x2)
Terminal block
screws (x4)
Green wire (ground)
Fig. 7-2