AGA GC 3, Инструкция пользователя и руководство по приготовлению пищи, Страница: 11 / 16

11
REMEMBER: BE CAREFUL OF THE HOT APPLIANCE.
DO NOT USE A STEAMER CLEANER TO CLEAN THIS COOKER.
DO NOT USE ABRASIVE PADS OR OVEN CLEANERS.
Top Plate and Front Plate
The easiest way to clean the Aga top plate and front plate is to mop up spills as soon as they
happen. Baked-on food is more difficult to clean but can usually be removed with proprietary
vitreous enamel cleaners or mild cream cleaners using a damp cloth, or, if necessary a nylon
scouring pad. If milk or fruit juice or anything containing acid, is spilt on the Aga, wipe it up
immediately. Also clean off any condensation streaks on the front plate around the oven doors
or the vitreous enamel maybe permanently discoloured.
All that is usually needed to keep the vitreous enamel surfaces of your Aga bright and clean is a
daily rub over with a damp soapy cloth followed immediately with a clean, dry cloth to avoid
streaks.
Remember the top plate and the polished covers will scratch if pans or utensils are dragged
across them.
Insulating Covers and Oven Doors
The linings of the insulating Covers and oven doors may be cleaned with a cream cleanser or a
soap impregnated pad.
Open the covers and lift off the oven doors to allow them to cool a little before cleaning. Do not,
however, immerse the doors in water as they are packed with insulating material which will be
damaged by excessive moisture.
Refer also to the Cleaning Section in the Aga Book.
Ovens and Hotplates
The cast iron ovens help to keep themselves clean, they merely need to be brushed out
occasionally with a long handled stiff brush.
The wire brush is provided for cleaning the hotplate and any burnt on spills in the cast iron ovens.
Roasting Tins
The roasting tins should be cleaned in hot, soapy water, soaking if necessary. A nylon scouring
pad can also be used.
DO NOT use caustic cleaners.
DO NOT USE ANY OVEN CLEANERS .
Important: Aga recommend Vitreous Enamel Association approved cleaners for cleaning
the vitreous enamelled surfaces of this product.
But they are unsuitable for use on: chrome and stainless steel components, including the
insulating covers, hand-rails and their brackets.
The insulating covers should be cleaned regularly with a NON-ABRASIVE mild detergent,
applied with a soft (coarse free) cloth and lightly polished up afterwards with a soft
(coarse free) duster or tissue, to bring it back to its original lustre.
CLEANING AND CARING