AGA ATHOOD, Инструкция по эксплуатации, Страница: 7 / 12

EN
7
7
ELECTRICAL CONNECTION
• Connect the hood to the mains through a two-pole switch hav-
ing a contact gap of at least 3 mm.
• Remove the grease s (see paragraph Maintenance) being
sure that the connector of the feeding cable is correctly inserted
in the socket placed on the side of the fan.
Chimney assembly
Upper chimney section
• Slightly widen the two sides of the upper chimney and hook
them behind the brackets
7.2 .1
, making sure that they are prop-
erly housed.
• Secure the sides to the brackets using the 4 screws
12c
(2,9 x
9,5) supplied.
Lower chimney section
• Slightly widen the two sides of the section and hook them be-
tween the upper section and the wall, making sure that they are
properly housed.
• Fix the sides of the bottom section to the hood body using the 2
screws
12c
(2,9 x 9,5) supplied.
• When installing the recirculation version, the directional
grills
8a
–
8b
in their housings so that the directional symbols
are at the top and towards the front of the hood. Ensure that
they are inserted correctly in the outlet connection piece
15
.
Fitting the styling rail
•
•
Fit the rail over the front of the cookerhood.
Fit the Allen headed bolts through the rail end support fixing
holes and secure to cookerhood.