AGA APRO30AGSS, Руководство пользователя

Страница: 10 / 32

6
ArtNo.311-0002 Pan with rim
Adjust the flame height to suit by turning the knob counter-
clockwise
(Fig. 2.3)
. On this range the low position is beyond
high, NOT between high and off. The ‘
LO
’ marks the low
position. This setting is ideal for simmering.
If a burner flame goes out, the burner will detect this, and
automatically relight. However, if there has been a large
spill or boil-over, we recommend turning the burner off and
cleaning the area, before relighting.
If a burner does not ignite within four seconds, turn off
the control knob and leave it for five minutes, before
relighting it.
Make sure flames are under the pans
(Fig. 2.4)
. For safety
reasons, adjust the flames so that they do not extend beyond
the edge of the cooking utensil. Using a lid will help the
contents boil more quickly.
Large pans should be spaced well apart.
Pans and kettles with concave bases or down-turned base
rims should not be used
(Fig. 2.5)
.
Simmering aids, such as asbestos or mesh mats, are
NOT recommended
(Fig. 2.6)
. They will reduce burner
performance and could damage the grates.
Avoid using unstable or misshapen pans that may tilt easily
and pans with a very small base diameter e.g. milk pans,
single egg poachers
(Fig. 2.7)
.
Igniting Cooktop Burners without Electricity
If there is a power failure the cooktop burners can be lit with
a match.
1.
Hold a burning match ½” from the burner head, keeping
your hand as far horizontally away from the burner as
possible.
2. Push and turn the burner control knob to HI/lighting
position. As soon as the burner flame lights move your
hand away.
3.
Turn the burner control knob to the OFF position when
you have finished using it.
ArtNo.311-0001 Right pans gas
ArtNo.311-0004 Tipping wok
Art No. 311-0003 Simmer aids
Fig. 2.3
Fig. 2.4
Fig. 2.5
Fig. 2.7
Fig. 2.6