AGA ADZ 6040 BL, Руководство пользователя

Страница: 15 / 24

Normal height
x 4 feet x 4 feet
After adjustment
Normal height
x 4 feet x 4 feet
After adjustment
1762 1822
x
Free area = X x Y x no. of slots (mm²)
Y
11
Before using for the first time
Clean the inside of the cabinet (see
“Care & Maintenance”
on page 7
).
Wait for 1 to 1.5 hours after placing the appliance in its final
position to allow the refrigerant to settle before connecting it
to the mains power supply.
Levelling feet
The appliance must be installed level to work properly.
If the unit is not level, the doors and magnetic seal
alignments, will not function correctly.
To level the unit, adjust one or both levelling feet, at the base
of the unit. Use a spirit level on a fixed surface to check your
product is level.
Adjustable feet
The appliance comes with height adjustment feet which
allow the appliance to be installed under bench and ensures
the appliance is stable and level.
ADZ 6040
Rotate the bottom feet anti-clockwise to raise the height up
to 880 mm. Or clockwise to lower the height to 820 mm
(
Fig. 4.5
).
ATWC 60154
Rotate the bottom feet anti-clockwise to raise the height up
to 1822 mm. Or clockwise to lower the height to 1762 mm
(
Fig. 4.6
).
Climate Class
Your wine cabinet is Climate Class N .
Each item has a climate class (shown on the rating label)
where it indicates the temperature range of the appliance.
The appliance may not work properly if it is left for a long
period at a temperature outside the specified range
(
Table 4.1
).
Details on how to set the internal temperature can be found
on page 5 of this manual.
Fitting an external plinth (ventilation)
You may wish to fit an external plinth across the front of
your appliance. This is allowed, however, you must provide
a suitable vent in the external plinth. Failure to provide
adequate ventilation will impair the function of your
appliance.
See
Table 4.2 as a guide.
An example of an external vent is shown in
Fig. 4.7
.
Climate Class Amb. T. (ºC) Amb. T. (ºF)
SN 10 - 32 50 - 90
N 16 - 32 51 - 90
ST 16 - 38 61 - 100
T 16 - 43 61 - 110
Model Free Area (mm²)
ADZ 6040 BL/
ADZ 6040 SS/
6000
ATWC 60154 BL/
ATWC 60154 SS/
14000
Table 4.1
Table 4.2
Fig. 4.5
Fig. 4.6
Fig. 4.7
ADZ 6040
ATWC 60154