AGA marvel MS15FA Скачать руководство пользователя страница 3

UNPACKING YOUR FREEZER

Remove Packaging

Your freezer has been packed for shipment with all parts 

that could be damaged by movement securely fastened.  

Cut the banding material at the bottom of the carton, unfold 

the carton at the bottom, and remove the carton from the 

appliance. Remove the plastic bag, styrofoam corner posts, 

and any tape holding the door closed and internal compo-

nents in place. The owners manual is shipped inside the 

unit in a plastic bag along with the warranty registration 

card. 

Important

Keep your carton packaging until your unit has been 

thoroughly inspected and found to be in good condition.  If 

there is damage, the packaging will be needed as proof of 

damage in transit. Afterwards  please dispose of all items 

responsibly.

Note to Customer

This merchandise was carefully packed and thoroughly 

inspected before leaving our plant.  Responsibility for its 

safe delivery was assumed by the retailer upon acceptance 

of the shipment.  Claims for loss or damage sustained in 

transit must be made to the retailer.

DO NOT RETURN DAMAGED MERCHANDISE TO THE 

MANUFACTURER - FILE THE CLAIM WITH THE RE-

TAILER.

Help Prevent Tragedies

Child entrapment and suffocation are not problems of the 

past. Junked or abandoned freezers are still dangerous - 

even if they sit out for “just a few days”.

If you are getting rid of your old freezer, please follow the 

instructions below to help prevent accidents.

Before you throw away your old freezer:

•  Take off the doors or remove the drawers.

•  Leave the shelves in place so children may not easily 

climb inside.

If the unit was shipped or has been laying on its back for 

any period of time allow the freezer to sit upright for a 

period of at least 24 hours before plugging in. This will as-

sure oil returns to the compressor. Plugging the freezer in 

immediately may cause damage to internal parts.

It is important you send in your warranty registration card 

immediately after taking delivery of your freezer or you can 

register online at www.agamarvel.com.

The following information will be required when registering 

your unit.

Model Number

Serial Number

Date of Purchase

Dealer’s name and address

The model number and serial number can be found on the 

serial plate which is located on the bottom face inside the 

cabinet.

Warranty Registration

NOTE

3

WARNING - 

Dispose of the plastic bags which can be a 

suffocation hazard.

Содержание MS15FA















Отзывы: