AG ZR-HM3-100-RC, Инструкция по установке и эксплуатации, Страница: 15 / 36

EN
15
4. Response of Leds (table 1)
Led Colour Status Meaning
Green Blink Frequency proportional to the power read by way of the CTs
-- -- Not used
Green Blink ZigBee communication: device not paired with the network
Green Permanently alight ZigBee communication: device paired correctly with the network
Green Permanently alight Power supply
Green Blink Transfer of information to Elios4you [Pro] Smart system
Red Permanently alight Device not connected to the Elios4you [Pro] Smart system
5. Operation of button (table 2)
Function Command Meaning
Pairing
Press briefly
(1 s approx)
Activates pairing of Energy Meter RC with Elios4you [Pro] Smart.
Unpairing
Press and hold
(15 s approx)
Energy Meter RC no longer paired with Elios4you [Pro] Smart
Reset
Press and hold
(30 s approx) The Reset function restores the parameters of the device to the factory settings. All stored
data will be deleted
6. Meaning of terminal numbers (table 3)
Terminal Meaning
1 SIG + (CT L1), red wire
2 SIG - (CT L1), black wire
3 SIG + (CT L2), red wire
4 SIG - (CT L2), black wire
5 SIG + (CT L3), red wire
6 SIG - (CT L3), black wire
7. Troubleshooting
1) There is no reading of power generated by the photovoltaic system
9
Check that only the phase wire passes through the CTs of the Energy Meter RC
9
Turn the direction of the CTs through 180 degrees
2) Grid power transfer is not being read correctly
9
Check that only the phase wire passes through the CTs of the Energy Meter
9
Turn the direction of the CTs through 180 degrees
3) The reading of the power drawn by the load is a negative value
9
Turn the direction of the CTs through 180 degrees
4) During the Energy Meter RC pairing procedure, no other device is detected
9
Check that the ZigBee communication Led (table 1) lights up in blink mode
9
Check the distance between Elios4you [Pro] Smart and Energy Meter, and if necessary, move the meter closer or install a repeater