AG Neovo QM-65A, Руководство пользователя

Страница: 75 / 102

71
ADJUSTING THE LCD DISPLAY
It e m Fu n c t i o n Op e r a t i o n Ra n g e
Audio Out Sync
Enable/disable audio out (line out)
volume adjustability to sync with
internal speakers.
1 Press the / button on the
control panel or the / button on
the remote control to select the
setting.
2 Press the button on the
control panel or the button
on the remote control to set the
value.
Off
On
Config ration ettings
Switch on state
Panel saving
RS232 routing
Boot on source
WOL
RGB Range
Configuration1 reset
Factory reset
Force on
Action
RS232
Action
Off
Full Range
Action
Action
Picture
Screen
Audio
Configuration 1
Configuration 2
Advanced option
1 Press the MENU button on the control
panel or the button on the remote
control to call out the OSD window.
2 Press the / button on the control
panel or the / button on the remote
control to select
Config ration
.
Then press the button on the
control panel or the button on the
remote control.
3 Press the / button on the control
panel or the / button on the remote
control to select an option.
4 Press the button on the control
panel or the button on the remote
control to open the submenu item.
It e m Fu n c t i o n Op e r a t i o n Ra n g e
Switch on state
Select the display status used
for the next time you connect the
power cord.
• Power off: The display will
remain off when the power cord
is connected to a wall outlet.
• Force on: The display will turn
on when the power cord is
connected to a wall outlet.
• Last status: The display will
return to the previous power
status (on/off/standby) when
removing and replacing the
power cord.
1 Press the / button on the
control panel or the / button on
the remote control to select the
setting.
2 Press the button on the
control panel or the button
on the remote control to set the
value.
Power off
Force on
Last status