Installation
•
Remove all the packages from the panel.
•
Place your LCD display in a suitable place. Make sure that there is enough space
for adjustment, especially the rear of the panel.
Connecting LCD Display to PC (Analog)—
1. Turn off your PC and connect the D-sub 15-pin VGA cable included in the
package to the VGA port on your PC.
2.
Connect the adaptor to the Adaptor IN socket at the back of your LCD display.
3.
Connect one end of the power cord to a power source and another end to the
adaptor.
4.
Turn on your PC.
5.
Turn on your LCD display. If the power LED is green and there is no display on
the screen, please refer to the Warning Messages and Troubleshooting Guide in
the User Manual.
6.
Change the display resolution to 1280X1024 pixels at 60Hz from your PC. Push
the
menu
button and then the
Auto Adjustment button. The panel will
automatically tune to the optimal performance.
Connecting LCD Display to a Digital Source (Digital, DVI)—
1.
Turn off the PC and connect one end of the DVI-D digital cable included in the
package to the DVI port at the back of the panel and another end to digital out
on your VGA card.
2.
Repeat steps 2-6 of the previous section.
Connecting LCD Display to Video Source (CVBS or S-Video)—
1.
Turn off the equipment (e.g. TV, camera) and connect one end of the CVBS or
S-Video cable included in the package to the CVBS or S-Video port at the back
of the panel and another end to video out of the particular equipment.
2.
Repeat steps 2-6 of the previous section.
7
