AG Neovo K Series, Руководство пользователя

Страница: 11 / 22

FRONT PANEL CONTROL
•
Power Button
:
Press this button to switch ON/OFF of monitor’s power.
•
Power Indicator
:
Green — Power On mode.
Red — Off mode.
•
MENU / ENTER :
Active OSD menu or function adjust confirm or Exit OSD menu when in
Brightness/Contrast OSD status.
•
Contrast :
Adjust contrast or function adjust.
•
Brightness :
Adjust brightness or function adjust.
•
Auto Adjust button / Exit:
1. When OSD menu is in active status, this button will act as EXIT-KEY (EXIT
OSD menu).
2. When OSD menu is in off status, press this button over 2 seconds to
activate the Auto Adjustment function.The Auto Adjustment function is used
to set the HPos, VPos, Clock and Focus.
•
OSD Lock Function:
To lock the OSD, press and hold the MENU button while the monitor is off and
then press power button to turn the monitor on. To un-lock the OSD - press
and hold the MENU button while the monitor is off and then press power button
to turn the monitor on.
NOTES
•
Do not install the monitor in a location near heat sources such as radiators or
air ducts, or in a place subject to direct sunlight, or excessive dust or
mechanical vibration or shock.
•
Save the original shipping carton and packing materials, as they will come in
handy if you ever have to ship your monitor.
•
For maximum protection, repackage your monitor as it was originally packed at
the factory.
•
To maintain the cleanness of your LCD display, wipe it periodically with clean
and soft cloth. The screen may be damaged by any liquid splash.
•
To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn
stains may be removed with a cloth lightly dampened with a mild detergent
solution. Never use strong solvents such as thinner, benzene, or abrasive
cleaners, since these will damage the cabinet. As a safety precaution, always
unplug the monitor before cleaning it.
10