INTRODUCTION
2.4.3 Input Panel (Receiver, HVWIP-R) Front
1
Operation Mode: Normal Mode: Transmit Rs232 signal between Tx/Rx Debug Mode: Use for
Debug device
2 Power LED: Indicates Power active.
3 Link LED: Connection is made to the Rx at the HD Monitor
4 USB Port: Type A female USB 2.0 for connecting peripheral devices
5 USB Port: Type A female USB 2.0 for connecting peripheral devices
2.4.4 INPUT PANEL (Receiver, HVWIP-R) Rear
6 Power Connector: 12V DC Power Supply
7
USB Port: Type A female USB 2.0 for
connecting peripheral devices.
8
USB Port: Type A female USB 2.0 for
connecting peripheral devices
9
Ethernet Jack: HDMI signal and control data
IN form TX
10
RS-232 Jack : 3 pin Terminal Block
Connector for serial control
11
Audio Jack : 3 pin Terminal Block Connector
for 5.1 PCM audio out to speakers
12 HDMI OUT: HDMI Femaile 19 Pin port for local out HDMI Monitor
9
1
2
3
4
5
6
7
8
9
10
11
12
