HIP-Series HDMI over IP Extenders
6
HDMI over IP Extender
HDMI over IP Extender
HDMI Source
HDMI Cable
IR Emitter
Cat5e/6 Cable
Transmitter
Receiver
HDMI Cable
HDMI Display
IR Sensor
DVD or STB Remote
Making Connections and Operations
1) Connect the HDMI signal source (Such as DVD, STB etc) to HDMI Transmitter.
2) Connect a Cat5e/6 cable to both the LAN of the transmitter and LAN port of the Receiver.
(The cables must follow the standard of EIA-TIA 568B).
3) Connect the HDMI display into the Receiver.
4) Connect the power supply into the Power port.
5) Connect the IR TX cable into IR TX port on the back panel and affix the emitter onto the
source IR sensor.
6) Connect IR-RX cable into IR-RX port on the receiver and affix the IR receiver in direct line of
site with the handheld remote control. It is recommended to affix the receiver on the display
frame/bezel or the display stand.
Attention: Insert/Extract cables gently.
Applications
Point-to-Point
