AG Electronica iMCU7100EVB, Руководство пользователя

Страница: 4 / 14

© Copyright 2009 WIZnet Co., Inc. All rights reserved. Ver. 0.9. β eta
4
2 Getting Started
2.1
Power On
Connect Character LCD, UTP, and RSR232 with the power cable as shown in the Fig.2.1. below.
<Fig.2.1> iMCU7100EVB Cable and LCD connection
Connect cable to iMCU7100EVB board, confirm power, and check the following.
1. Check whether POWER LED(D13) is ON.
2. Check whether “iMCU7100 EVB” and “192.168.001.002” appears on the Character LCD.
If the above two are checked iMCU7100EVB board will work perfectly.
2.2
Ping Test
Execute the Hyper Terminal of Windows and configure the port as below.
Run the command prompt at TEST PC, and use ‘Ping’ to check the ‘Ping Reply’ from W7100.
1. Confirm the network information of Test PC as the following
Source IP Address : 192.168.1.3 (It’s up to TEST PC)
Gatway IP Address : 192.168.1.1
Subnet Mask : 255.255.255.0
2. Execute ping command as the following
“C:\> ping 192.168.1.2”