©Copyright Lotronic 2018
4
PIXSTRIP40
4.
When rigging the product onto a truss, you should use a mounting clamp of the appropriate
weight capacity.
5.
The bracket adjustment knobs allow for directional adjustment when aiming the product to the
desired angle. Only loosen or tighten the bracket knobs manually. Using tools could damage the
knobs.
6.
When mounting the product on the floor, make sure that the product and cables are away from
people and vehicles.
Mounting Instructions
1.
Attach the clamp to the mounting bracket.
2.
Attach the clamp to the desired structure or surface.
3.
Attach the safety cable to the product's safety loop.
Series Attachment Instructions
The unit can be attached in an end-to-end formation to create a strip up to 4m long from just one
rigging point.
Do not connect more than a total of 4 strips in a row when hanging vertically.
Loosen the safety loop and fastening knob.
Slide the connecting bracket out till it stops and tighten the safety loop.
Slide the 2
nd
strip into the connecting bracket and tighten the fastening knob, then attach the safety
cable.
Be sure to install the safety cable last when attaching the products in series.
