©Copyright Lotronic 2012 LMH430Z
3
www.lotronic.com Page 3
CONTROL PANEL DESCRIPTION
MENU BUTTON
Use this button to choose functions. press the
MENU
button up to when the required one is showing on the display. If you select a function and if you want to
escape from this function without to save the parameter, press menu button.
UP BUTTON
Use to set the value of the selected function
DOWN BUTTON
Use to set the value of the selected function
ENTER BUTTON
Use to enter in a function or to save the value of the selected function
OPERATING
Main Function
To select any of the given functions, press the
MENU
button up to when the required one is showing on the display. Select the function by
ENTER
button and
the display will blink. Use
DOWN
and
UP
button to change the mode. Once the required mode has been selected, press the
ENTER
button to setup, to go back
to the functions without any change press the
MENU
button again. Hold and press the
MENU
button about one second or wait for one minute to exit the menu
mode.
The main functions are showing below:
DMX mode
Use Menu button until A--- ( A001 to A512 ) will be display
After use Up and Down buttons to set the DMX address then press Enter button to save your choice.
In DMX mode, The unit is controlled by a DMX controller or a DMX software.
You can set the DMX address between 001 to 512
Press Menu button to back to the previous menu
Auto Mode
Use Menu button until AU-- ( AU01 or AU02 ) will be display
U Up and Down buttons to choose one of these two automatic mode ( AU01 auto mode or AU02 auto mode ) then press ENTER to save the choice.
In auto mode, the moving head will play automatically an recorded internal program
Press Menu button to back to the previous menu
Sound Mode
Use Menu button until SN-- ( SN01 or SN02 ) will be display
Use Up and Down buttons to choose one of these two sound mode ( SN01 sound mode or AU02 sound mode ) then press ENTER to save the choice.
In sound mode, the moving head will play an recorded internal program in follow sound of the music
Press Menu button to back to the previous menu
NO.
Display
Instruction
1
A001-A512
Press up/down button to select DMX address
2
AU01-AU02
Press up/down button to select auto mode 1 or 2
3
SN01-SN02
Press up/down button to select sound mode 1 or 2
4
RPOF-RPON
Press up/down button to reverse Pan move
5
RTOF-RTON
Press up/down button to reverse Tilt move
6
DROF-RDON
Press up/down button to reverse readout display
7
DFOF-DFON
Press up/down button to load default output setting
8
RST
Reset
