©Copyright Lotronic 2014 LEDWASH 715
Some explinations on several menu :
- User mode set :
- No DMX status :
use to set the moving head status when the DMX signal is
:
• Close Shutter
: The moving head is on blackoput mode
• Scene
: The moving head keeps the last received information
• Auto
: The moving head is set in auto mode on the built-in program
• Music
: The moving head is set in sound mode on the built-in program
- Menu Prog edit :
This menu is used to select the programs assigned to each group of program groups, to edit one of the 10 butil-in programs or to edit the 250
scenes of thes programs.
The moving head can be assigned oto 3 differents slave groups ( slave function of the function menu ). The master moving head send program with
a data to the slave groups. The program are sent in loop like that :
All the slave moving head receive all the programs but they follow only programs assigned to their slave group number. A moving head assigned to
the slave groupe 2 only work with the auto prog 2
-
Program selection
: This sub menu is used to assigned on of the 10 built-in program to each auto program X
-
Program edit
: Select the program number to edit
-
Scene edit
: This sub menu is used to edit one of 250 scenes.
Select the scene you wish to edit, confirm with ENTER. Select each function (PAN,
TILT,... etc), press ENTER, and then assign a value between 000 and 255 for the selected function. Then give a duration to the
scene in seconds and then a fade time in seconds
- Auto scene rec : This sub menu is used to record automatically scenes from DMX controler. You can record up to 250 scenes.
Give the number of scene to record in specifiying the stating scene and the end scene
After to select starting and last scene, press enter button. The moving will wait scene from controler
Precision on the conduct of the programs and the scene groups what they contain
Exemple :
The program 2 is set with scene number 10, 11, 12 and 13
The program 4 is set with scene number 8, 9 and 10
The program 6 is set with scene number 12, 13, 14 and 15
The auto prog 1 is assigned to program 2
The auto prog 2 is assigned to program 4
The auto prog 3 is assigned to program 3
the 3 groupe of slave moving head ( SLAVE 1, SLAVE 2 and SLAVE 3 )
will run programs on the same number of steps