afx light 15-1877, Руководство пользователя

Страница: 6 / 41

©Copyright LOTRONIC 2016 6CUBE-FX Page 6
Red Red Manual test 000~255
Gren Green Manual test 000~255
Blue Blue Manual test 000-255
Whit White Manual test 000-255
Stro Strobe Manual test 000-255
Dim Dimmer Manual test 000-255
led Led Manual test 000-255
Led
on LED black out on
off LED black out off
disp
on Display reverse on
off Display reverse off
Test Whole Function Test
Fhrs Operate Time
Ver Software Version
Rest Whole Reset
defa Default
MENU operation
This fixture has 4 buttons on the front panel to access, edit and set all functions.
[ MENU ]: press MENU key to enter into the submenus. Press MENU again to leave the sub-menu. If no key is ressed
during 30 seconds, the unit will go back to MENU display automatically.
[ Up ]: press UP key to increase the displayed values. Keep pressed to increase the values quickly.
[ Down ]
：
press DOWN key to decrease the displayed values. Keep pressed to decrease the values quickly.
[ ENTER ]
：
in normal status, this button has no function. In edit mode, press ENTER to enter into the sub-menu.
Function setting
1) DMX address setting
1. Press <MENU>
2. Press <UP/DOWN> to choose, then pres <ENTER> to enter [Addr]
3. Press <Up/Down> to choose address 001~XXX
4. Press <ENTER> to confirm, or press "MENU" to exit
2) Channel Setting
1. Press <MENU> to enter EDIT interface
2. Press <UP/DOWN> to choose [Chnd], press ENTER
3. Press UP/DOWN to choose the channel mode ‘14CH’ or ‘16CH’
4. Press ENTER to confirm, or press "MENU" to exit
3) Scene mode (before this setting, press MENU, select < Lost>, select <Soun> or <Auto>and save. The unit must be
set to Sound/Auto Mode first)
1. Press <MENU> to enter EDIT interface
2. Press< UP/DOWN> to choose [Shnd] and press ENTER
3. Press< UP/DOWN> to choose Sh1, Sh2, Sh3 (can choose any scene mode to operate)
4. Press <Enter> to confirm, or press "MENU" to exit.
4) Master-slave setting
1. Press <MENU> to enter EDIT interface