LED Indicator will flash a blue light every four seconds when the headphones
are on.
Note: If the power is on and there is no signal input for 15 minutes, the
headphones will automatically enter Standby Mode to save power. The LED
Indicator will flash twice with a blue light every 10 seconds.
Once in Standby Mode, there will be a two second delay before playing
music or making phone calls while the headphones “wake up”.
When the battery is low, the LED Indicator will flash a red light every four
seconds.
•
Charging
Connect Sportz M3 to a standard USB port on your PC or a wall charger with
the Micro-USB Charging Cable. Sportz M3 will be fully charged within two
hours. The LED Indicator will display a solid red light when charging, and will
turn solid blue when it’s fully charged.
Note: Though the headphones may have power right out of the box, it’s
recommended that Sportz M3 be fully charged before their first use.
The battery is designed to last the life of the product. It should only be
removed by a recycling facility. Any attempt to remove or replace your battery
may damage the product and void the warranty.
•
Call Button:
Press the Call Button once to answer/hang up the call.
•
Volume Control
Use the Volume Up and Volume Down Buttons to increase or decrease the
volume.
•
Reflective Sticker:
For maximum visibility in darkness, make sure the Reflective Sticker is not
covered by hair or clothing.
