People on the other
end of a phone call
can’t hear you.
The
Play Button
was pressed during the
call, so the microphone of Bluez is muted.
Press
Play Button
again
to turn off mute function.
Spec
Speaker Type
Bone Conduction Speaker
Playback Time
Up to 6 Hours
Charging Time
<3 Hours
Standby Time
Up to 10 days
Wireless Range
10m(33ft)
Bluetooth
2.1+EDR
Weight
43 grams/1.5 ounces
Storage and maintenance
Store the headset in cool and dry place. The working temperature should be 0~45
℃
(32~113°F). Working in cold/hot environment or highly humid area will reduce the life of bat-
tery.
After storage for a long period, please charge the headset before using again.
The headset is water resistant, but is NOT waterproof. Please DON'T put the headset into
water. Clean it with soft cloth if necessary.
Clean the headset with a soft dry cloth.
Do not bring the headset into contact with any sharp object.
Do not leave the headset to extremely high or low temperature.
FCC Caution:
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must ac-
cept any interference received, including interference that may cause undesired operation.
This device and its antenna(s) must not be co-located or operating in conjunction with any
other antenna or transmitter.
This equipment should be installed and operated with minimum distance 20cm between the
radiator and your body.
Note: This equipment has been tested and found to comply with the limits for a Class B digi-
tal device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide rea-
sonable protection against harmful interference in a residential installation. This equip-
ment generates, uses and can radiate radio frequency energy and, if not in-
stalled and used in accordance with the instructions, may cause harmful interference to ra-
dio communications. However, there is no guarantee that interference will not occur in a par-
ticular installation. If this equipment does cause harmful interference to radio or television re-
ception, which can be determined by turning the equipment off and on, the user is encour-
aged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Declaration of Conformity of Industry Canada
