Instruction manual
Buffer tank ABT 50
9
3.3
Buffer operation
The ABT 50 buffer tank is a storage tank for heat or cold that, once
accumulated, can be used when the heat/cool source is switched off.
This reduces the on/off frequency of the heat/cool source.
The ABT 50 buffer also acts as a hydraulic low-loss header (in case
of parallel connection) - stabilising the operation of the system as
well as the heat/cool sources.
The buffer increases the water capacity in the system and thus
ensures an adequate minimum fluid flow through the source. This is
a key aspect for the correct operation of the heat pump.
3.4
Scope of delivery
The scope of the delivery of the ABT 50 buffer tank includes:
•
buffer tank ABT 50,
•
2 half union
G1” F x union nut G1½”,
•
plug
G1½” for closing heating element connection,
•
2 plugs
G1¼” for closing second heat/cold source
connections,
•
plug
G½”
•
automatic air vent with mounting valve
R½”,
•
wall mounting brackets,
•
installation and operation manual.
4
Transport and storage
ATTENTION
Possibility of damage to the device during improper transport.
Do not throw the device
Protect against water, moisture, dirt and dust.
Do not place heavy items on the packaging, do not stack.
ATTENTION
Possibility of damage during incorrect storage.
Store the device in a dry and clean room.
Protect against water, moisture, dirt and dust.
