Afriso EURO-INDEX OWWG3 Series, Руководство по эксплуатации

Страница: 66 / 156

Maintenance
26 ÖWWG 3
9 Maintenance
The function of the leak detection system must be checked at
appropriate intervals, at least twice per year.
The test must be performed in such a way as to verify the correct
function of the leak detection system in terms of the interaction of all
components when the sensors are wetted.
Probes that have been attacked by the liquid to be detected must be
replaced. It is the responsibility of the owner/operator to choose the
type of inspection and the intervals during the period mentioned.
9.1 Maintenance times
Table 3: Maintenance times
When Activity
Monthly

Perform visual inspection for damage,
corrosion and pollution.
Twice a year

Perform a function test, see chapter 6.6,
page 24.
Annually and after
repair or during
tests according as
per §19 i WHG
(German Water
Management Act).

Perform a function test, see chapter 6.6,
page 24.

Check whether the installation
requirements are complied with and
perform function test (see chapter 6.6,
page 24).

The test results must be confirmed in
writing to the owner/operator.
After contact with
water or no later
than ten years

Replace probe, see chapter 6.1, page 18.