Operation
– English –
KSG
14
4.3
Function test safety valve
1.
Provide a suitable container to collect the liquid discharged via
the safety valve.
2.
Protect persons against splashes of the liquid.
3.
Briefly open the safety valve by turning the cap.
Liquid escapes.
After releasing the cap, no water may remain at the safety valve.
5
Operation
For safety reasons, liquid must escape via the discharge line of the
safety valve during heating.
Do not shut off
the safety valve.
If the safety valve has responded, check the system prior to re-
suming operation.
6
Maintenance
When
Activity
Every 6 months
Perform a function test of the safety valve, see chapter 4.3,
page 14
Verify that no accumulations can form in the system which can
interfere with the discharge of the liquid from the safety valve
or with the proper operation of the components
7
Troubleshooting
Due to the integrated mounting valve, the quick air vent can be re-
placed while the system is under pressure.
Repairs may only be performed by specially trained, qualified staff.
1.
If you need to perform work on the pressurised system, take all
necessary precautions to ensure that such work on the pressur-
ised system can be performed safely.
2.
After repairs of the system, check the safety valve for proper
operation, see chapter 4.3, page 14.
