13
/
34
Female side connector(F)
Male side connector(M)
Assembly Instructions:
1.
Adjust the striper stopper and put the cable in corresponding notch to strip the
length of 12mm. Please refer to the following figures.
2.
Insert striped cable into contact barrel and insure all conductor strands are
captured in the contact barrel.
3.
Compress them together with the crimping pliers.
4.
Insert contact cable assembly into back of male and female connector. A “click”
should be heard or felt when the contact cable assembly is seated correctly. Then
turn the cap to the coupler. Please refer to the following figures.
