AFM ES-200A, Руководство пользователя

Страница: 8 / 42

8 Safety
4510003 Rev B
•
Do not make any modifications to either the electrical circuitry or the
mechanical assemblies of this machinery. Such modifications may introduce
hazards that would not otherwise be associated with this machinery. American
Film & Machinery will not be responsible for the consequences of such
unauthorized modification.
•
The use of certain types of plastic films in sealing and shrinking equipment may
result in the release of hazardous fumes due to the degradation of the film at
high temperatures. Before using any plastic film in this equipment, the
manufacturer or supplier of the film should be contacted for specific information
concerning the potential release of hazardous fumes. A l w a y s p r o v i d e
a d e q u a t e v e n t i l a t i o n .
• Keep combustible and explosive materials away from this equipment. The
equipment may be a source of ignition.
•
Do not use with pressurized containers. Exposure to high temperatures can
cause pressurized containers to burst, and could cause injury to operators
and other personnel nearby.
• Take care when clearing product jams inside the heat tunnel. Do not use
anything that could potentially puncture a container. Use an electric lift to
raise the tunnel from the conveyor before clearing product from inside the
heat tunnel. If containers remain in the heat chamber, turn off power and
allow the temperature to drop below 100 °F before clearing. Temperature
inside the tunnel can easily cause burns.
Cautions
ELECTRICAL HAZARD: Do not open cover. No user-serviceable parts inside.
ELECTRICAL HAZARD: Ensure that unit is properly grounded.
FIRE HAZARD: Do not tamper with electrical equipment.
WATER HAZARD: Keep the equipment dry and indoors.
FUME HAZARD: Some fumes may be a health hazard with prolonged exposure.
Ensure that the area has adequate ventilation.